Functional operation

On/Off Switch the water heater to enter the power-on state, and the water heater is allowed to enter the heating work.
Standby state: The machine will enter the standby state when it is used for more than 30 seconds, and the machine will automatically start when it enters the water.

When starting up, the set temperature will be displayed on the LCD screen.
Press the [Temperature], [Cool] key to increase or decrease the set temperature value.
Setting range: 30-60°C. The factory value is 42°C, and the set temperature has a power-off memory function.

The ideal bathing temperature can be set through the [Temperature Up] and [Temperature Down] keys. When the temperature is set, it will be adjusted to the set temperature within about 4 to 8 seconds, and the control accuracy of the outlet water temperature is ±0.5°C.

In the power-on state, when it detects that the flow rate of the flow sensor is greater than (or equal to) 1.6L/min, it starts temperature control, and when it detects that the flow rate is less than 1.5L/min, it stops heating.

The heating output power is determined by the current water flow, the difference between the set temperature and the inlet water temperature to achieve the best energy-saving output power.

The water flow rate and the water inlet temperature directly affect the outlet water temperature of the electric water heater. When the temperature does not meet the ideal temperature, the water flow regulating valve under the water inlet of the machine can be adjusted appropriately to adjust the water flow size.

In the shutdown state, the heating time is reset; in the power-on state, the accumulated heating time is displayed.

The flow rate is displayed during work, and the unit is L/min.

Frequently Asked Questions

Is it cheaper to boil water with electricity? Or is it cheaper to use gas? 】Taipower said that "electric cooking" is the cheapest.
Take the three methods of boiling water commonly used by Chinese people as an example:
The most expensive is cooking with barreled gas, which costs up to 2.17 yuan per liter of cooking water;
The second most expensive is the use of natural gas, which costs 1.5 yuan per liter for boiling;
The cheapest thing is electricity. Even if the "summer electricity bill" is used to calculate, boiling water only costs 0.63 yuan per liter.
The cost of using natural gas to boil water is more than twice that of electricity.
If you use barreled gas and double (electricity), it is more than three times.
If the loss of the distance between the gas water heater and the hot water pipe in the bathroom is added, the use of an electric water heater is "safe", "cheap" and "convenient".

Not recommended, the pipeline distance is recommended to be within 4 meters, the shorter the pipeline distance, the better the performance.

35 degrees to 60 degrees, basically depends on the inlet water temperature and water flow rate at that time will affect the outlet water temperature.

It is instant hot, no storage tank is required, and continuous water discharge is no problem.

The thermal conversion efficiency reaches 98%, and the thermal efficiency of the National Bureau of Standards reaches 118%. It is not scaled, high temperature resistant, acid and alkali resistant, and is not afraid of groundwater. It has a long service life. The only internal heater in Taiwan is guaranteed for 2 years.

The temperature is precisely controlled by the microcomputer. You can set the ideal bathing temperature through the [Temperature Up] and [Cool Down] buttons. It will be adjusted to the set temperature within about 4 to 8 seconds. The control accuracy of the outlet water temperature is ±0.5°C, and there will be absolutely no hot and cold The problem.

建議安裝QR109 / 209,並安裝於浴室內,透過綠瓦的恆溫設計,不用再混合冷水去達到您要的溫度,即便持續供應熱水1小時以上也都沒有溫降的問題。

※請注意,在浴缸放滿水前極有可能會使先放入浴缸的水冷卻而無法達到設定溫度。

The green tile electric water heater complies with national safety regulations, and has a built-in electronic high-speed leakage circuit breaker. The interior has been subjected to moisture-proof treatment. After inspection, the waterproof level of the whole machine reaches IPX4, and there are 11 layers of safety protection, which is absolutely safe.

The green tile instant electric water heater has a one-year warranty for the whole machine and a two-year warranty for the heater.

Calculate the electricity you use based on water flow, inlet water temperature, and set temperature, so as to achieve the effect of saving energy and electricity. Every time you lower it by one degree, you can save your wallet. Compared with traditional electric water heaters, it can save 5,000 yuan a year on average.

The QR-001A power 6500w current 30a machine has 6 internal heating tubes, and the QR-100 power 8500w current 40a machine has 10 internal heating tubes, so the heating efficiency is different. Of course, when winter or cold current comes, QR-001A needs to reduce the water flow to reach the set temperature.

Whether it is 9900W, 8500W, or 6500W, the green tile instant electric water heater can reach your set temperature and produce hot water in 5 to 10 seconds. The difference in power lies in the temperature rise.

QR001A, the maximum is only 30 amps, and it also has frequency conversion function. It is suitable for relay heating in suites, kitchens, sinks, campers, laboratories, breakfast shops, and gas, solar, heat pumps, and heat storage water heaters. It has a wide range of applications and Won the 2020 Taiwan Excellence Award.

Troubleshooting

(1) Power outage: Just restart the no-fuse switch → you need to contact the plumber to replace it with a suitable no-fuse switch.
(2) The screen is abnormal: restart the no-fuse switch and still no response → contact the customer service department of the head office.
(3) The main board is abnormal: restart the no-fuse switch and still no response → contact the customer department of the head office.

You can test by yourself, set the temperature at 60 degrees, set the water flow rate to 3 liters, if the outlet water temperature can reach above 45 degrees, it is within the normal range of the machine
(1) The water flow is too large: just adjust the water flow valve at the water inlet of the machine counterclockwise
(2) Abnormality of the machine: Adjust the water flow valve counterclockwise, and the temperature still cannot reach above 45 degrees → contact the customer service department of the head office.

(1) The water flow is too small: Just adjust the water flow valve at the water inlet of the machine counterclockwise.
(2) On-site water pressure is too low: It is recommended to install a pressure-stabilized pressurized motor.
(3) Impurities in the water pipe are stuck on the filter screen of the water flow valve: remove the water flow valve and clean the upper filter screen.
(4) There is no pressurized shower head for green tiles.

The cold water at the water outlet flows back to the machine: install a check valve at the water outlet.

(1) No independent non-fuse switch installed: please install a suitable non-fuse switch for water and electricity, QR-001A needs to install a 30A non-fuse switch, QR-200/QR-100/QR-101 needs to install a 40A non-fuse switch wire switch.
(2) The amperage of the no-fuse switch is too low: Please ask the water and electricity to replace the no-fuse switch that meets the requirements. QR-001A needs to install a 30A no-fuse switch, and QR-200/QR-100/QR-101 needs to install a 40A no-fuse switch wire switch.

No water flow on the screen, heating animation: Adjust the water flow valve to the maximum clockwise direction and turn on the hot water fully, but there is still no animation effect → contact the customer service department of the head office.

en_US